D16Y8 into 2000 civic lx
10-29-2016, 08:11 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
D16Y8 into 2000 civic lx
Hello everyone! I'm preparing to do my b16y7 swap to a b16y8. I have both complete cars. The y8 is coming out of a 98 civic ex and the y7 is in a 2000 civic lx. When I bought the lx I was looking forward to a straight forward swap. Stupid me I would loose vtec. My general understanding is that if I swap the motor (y8) into the 2000 I'd need to use the y8 wiring harness and ECU. Which doesn't sound like too much of a pain except how would I swap ECU's. The whole point in swapping was to keep generally the same stats in a much better looking body. As this is my daily I'm also trying to be prepared for everything as I approach. Also would the difference in throttle placement from the y7 to the y8 be a problem due to length of the throttle cable? All feedback is much appreciated!
Last edited by MiguelRod; 10-30-2016 at 03:04 AM. Reason: Left out a word
10-31-2016, 12:16 PM
#2
Honda-Tech Member
Thread Starter
Join Date: Oct 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16y8 idles but wont drive
I actually need your help, I have two cars a 98 ex and a 2000 lx. I want to swap the y8 into the y7 but would I have to swap the ECU and harness because the y7 isn't vtec and the y8 is
Thread
Thread Starter
Forum
Replies
Last Post
RiTtEk401
Honda Civic / Del Sol (1992 - 2000)
6
10-23-2011 06:12 PM