d15b7 head gasket failed again
10-19-2009, 03:04 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: PITTSBURGH, PA, USA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
d15b7 head gasket failed again
This isn't the first time doing one of these so I'm pretty confident I didn't screw up.
I used the new MLS style gasket and new head bolts, following the revised torque specs. Also checked flatness with a good straight edge, thoroughly cleaned old gasket off.
I'm still getting exhaust in my cooling system.
That said, has anyone actually encountered a cracked head on this engine?
Guess I'm gonna pull it apart again and take the head to the shop and have it machined/pressure checked.
I used the new MLS style gasket and new head bolts, following the revised torque specs. Also checked flatness with a good straight edge, thoroughly cleaned old gasket off.
I'm still getting exhaust in my cooling system.
That said, has anyone actually encountered a cracked head on this engine?
Guess I'm gonna pull it apart again and take the head to the shop and have it machined/pressure checked.
Thread
Thread Starter
Forum
Replies
Last Post
