D15b7 to d16y7 Swap : Rough idle and questions about manifold compatibility
#1
Thread Starter
Join Date: Feb 2007
Location: boulder, co, usa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
D15b7 to d16y7 Swap : Rough idle and questions about manifold compatibility
I just swapped in a d16y7 longblock into my 92 dx. I reused the d15b7 intake manifold and all sensors. My old d15b7 had some sort of exhaust port on the dizzy side of the intake ports and the d16y7 doesnt. What's this port on the d15b7? Has anyone done this swap and had idling issues?
My timing is dead straight.
stock ECU and dizzy too.
My timing is dead straight.
stock ECU and dizzy too.
#2
Thread Starter
Join Date: Feb 2007
Location: boulder, co, usa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: D15b7 to d16y7 Swap : Rough idle and questions about manifold compatibility (theuntedstates)
this is mega important any info would be absolutely rad. i am really curious to find out what the<U> exhaust port on the intake side of the d15b7 head is all about. </U>
Thread
Thread Starter
Forum
Replies
Last Post
Noobster425
Honda CRX / EF Civic (1988 - 1991)
2
04-13-2010 06:33 PM
s2k3_oc08
Honda Civic / Del Sol (1992 - 2000)
1
08-08-2006 09:50 PM
bouncing, compatability, compatible, d15b7, d16y7, head, idle, intake, issue, longblock, manifold, rough, swap, transmission, wont