Cruise Control Not working after swap
#1
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Broward County Florida
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Cruise Control Not working after swap
I recently swapped out my d-series motor in my 2000 ex, and I'm looking to find out how to enable my cruise control again on my vehicle. I do drive alot on the highway so this is something that I need to replace right away...
Any assistance is appreciated!!
Any assistance is appreciated!!
#3
Honda-Tech Member
Re: Cruise Control Not working after swap
Yeah give us some knowledge of what it does/doesn't do.
Does the light come on when you press the button at least? Are all the fuses good? Did you make sure to hook the vacuum line back up?
You didn't mess with anything around the pedal area did you? There's about 3 or more switches that contribute to cruise control throughout your pedals.
Does the light come on when you press the button at least? Are all the fuses good? Did you make sure to hook the vacuum line back up?
You didn't mess with anything around the pedal area did you? There's about 3 or more switches that contribute to cruise control throughout your pedals.
#5
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Broward County Florida
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cruise Control Not working after swap
It was a B swap yes, The light comes on, but it does not engage... Nothing was touched around the pedals...
#7
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Broward County Florida
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cruise Control Not working after swap
That is what the issue is... I need to find out the connector to use to hook it into the manifold that I have.... its an aftermarket.
Thread
Thread Starter
Forum
Replies
Last Post
mrprofits1
Honda Civic / Del Sol (1992 - 2000)
21
04-30-2012 04:39 PM