Crower D16 Springs and Retainers?
#1
Crower D16 Springs and Retainers?
i just bought a ported/polished head for my d16, and the seller said it had crower valve springs and retainers on it. im pretty sure the crower retainers have the stamps on them, but these dont. also, is there any was i can tell if the springs are crower?
here are some pics.
Sorry about the size...
Modified by Tru at 12:51 AM 3/6/2006
here are some pics.
Sorry about the size...
Modified by Tru at 12:51 AM 3/6/2006
#5
Junior Member
Join Date: Feb 2006
Location: miami, fl
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tru)
i am almost positive the do here look at this f/s built head with crower springs and retainers
https://honda-tech.com/zerothread?id=1532364
https://honda-tech.com/zerothread?id=1532364
#6
i took one of the retainers anb valve springs off, and the springs have green and red markings on them. do the stock ones have this? the retainers weigh about 5.6 grams, and crower says they should weigh about 5.5, so its close, but what do the stock ones weight?
Thread
Thread Starter
Forum
Replies
Last Post
BoBo Racing
Acura Integra Type-R
13
03-22-2006 05:47 PM