TallAssFilipino

Sup guys,

I wanted to know if there were any of you out there who have done or know anybody who's done the 5-lug conversion using the CR-V's hub & knuckle.

There was an issue in one of them tuner magazines (maybe 5 months ago) premiering an all-wheel drive 3rd gen' Integra (hatch). It was done in Florida. I believe it had a turbo'd Type-R motor. It used the 5-lug off the CR-V, but I don't remember all the parts needed for the complete conversion.

This is where I need to know exactly what parts are needed because I don't know if the measurements of the (front) upper- and mid- control arms are different and if the rear hub & knuckle will align to the (rear) trailing and lower- control arms.

I'm going tomorrow to see how much I can get for a complete set of just the hub & knuckle's. If it's cheap enough, I'll just play around with it and see how it goes. Thanks for any help, guys.

TallAssFilipino

Forget it! I didn't know the rear were drums. I'm glad I didn't end up buying them. The front hub & knuckle's looked so nice tho. They were huge disks when I tried to picture them on an EH. O, well.