code 9 on 1.5 non-v????
#1
Thread Starter
Join Date: Mar 2007
Location: pasadena, tx, us
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
code 9 on 1.5 non-v????
ok i get a code that keeps popping up on my 93 1.5 non v-tec. i forget the code but its piston position sensor or something(have the paper in the car to lazy to get). i havent messed with it yet but it comes on goes away. also i put a chip in and it stayed off for a while then cam back on. so i was wondering if anyone could help if they have had the code before i start getting into it.
also i just put the chip in and car seems to start halling a little butt but then it seems slower when the light comes on? could it really do that and the chip was supposed to red line at 8200rpm and it still reds at 7000 like it did before. is the chip bad or did i install it wrong?
any help on either of the 2 matters would be a great help....oh and if anyone has any motor mount lyin around i could sure use them
also i just put the chip in and car seems to start halling a little butt but then it seems slower when the light comes on? could it really do that and the chip was supposed to red line at 8200rpm and it still reds at 7000 like it did before. is the chip bad or did i install it wrong?
any help on either of the 2 matters would be a great help....oh and if anyone has any motor mount lyin around i could sure use them
#3
Thread Starter
Join Date: Mar 2007
Location: pasadena, tx, us
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: code 9 on 1.5 non-v???? (zackm70)
uh yea it was a cheap ebay one lol but i dont know where else to get a tuned one or chipped ecu or anything thats a good and this one was cheap so if i got screwed i wasnt out much
Thread
Thread Starter
Forum
Replies
Last Post
93eg-EKhybrid
Honda CRX / EF Civic (1988 - 1991)
12
07-18-2002 01:40 PM