DailyDriven259

so I have a question because it got me into a dead stop...I have a 99 civic and I bought 52'' -3an steel braided line and 2 10mm x 1.0 to -3an fitting(because all the kits online come with these 2 fittings) but it turns out my clutch master cylinder threads are 10mm x 1.5 and there is no fitting that is 10mm x 1.5 to -3 an (-4 is the smallest) so im asking why my master has bigger treads like this while on the internet it says the threads are 10mm x 1.0 (same as the slave cylinder) where would I find a master with the smaller threads (on the 96-98 civics maybe?)

hope its not to confusing lol

B_Swapped93

And what brand is this clutch line. Are you sure it's the correct one for your car.

DailyDriven259

i have russell's line, -3an is the correct size for civic/integra clutch

EsotericImage

iTrader: (8)

http://www.hondatuningmagazine.com/t...ion/index.html

DailyDriven259

on that website the fittings he listed was 2 10mm x 1.0 to -3an but as I said my threads on the master is 10mm x 1.5