Homotor

okay the adaptor that connects from the line to the slave cylinder has a tear... anyone kno where i can get one of these or the part number so i can jus get it from honda? i was thinking bout just goin to get a long brake line and bend it to form from the master cylinder to the slave... any suggestions?

pdiggitydogg

http://www.slhondaparts.com/
you want flex in the line, so dont make a full hardline.

De_tour

You could also get a shop that specializes in hydraulics to put togethor a SS line for about 10$

Homotor

so what exactly is the name of this part? and could i get it from local autoparts? my old eg had the same problem and i ran a full hard line and had no problems... but i don't want to ghetto rig this one... im trying to get this done today i've been slaving over it for days now

pdiggitydogg

What car is this for... 96-00 is different than 92-95

92-95:


96-00:


We're talking about the rubber line, right? Number 9 / 12?
You could use a brake hose, its the same size/fitting, if you just want to get it done.

If you want the part number go to the link i provided, under chassis to clutch master cyl.
Use that site for all part numbers
("teaching you to fish...")

Homotor

thanks man!

1qucksol

nice link

jeproks

nice diagram