Clearance Issue on Hatch with N1 and lowering springs
04-12-2004, 08:40 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: New York
Posts: 17,994
Likes: 0
Received 0 Likes
on
0 Posts
Clearance Issue on Hatch with N1 and lowering springs
Ok I have an N1 on my 93 SI, I'm looking to lower the car and right now I have sitting in my room Koni Yellows as well as Neuspeed Race Springs. The springs are said to lower the car 2' in the front and 2.25' in the back? I'm debating if I should go with different springs, right now I have about 3.75 inches of clearance at stock height from the ground to the lowest part of the exhaust. Anyone have any pictures, as well as thoughts and suggestions... Also dont forget NY roads suck big time.
04-12-2004, 08:55 PM
#2
Join Date: Feb 2004
Location: BX
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clearance Issue on Hatch with N1 and lowering springs (JdmEGHatch6)
i had my n1 put over the suspension and that fixed my clearance problem when i first put it on it was damn near dragging on the floor 
04-12-2004, 09:30 PM
#3
Join Date: Apr 2002
Location: You Dont Want nO Problem in New Hoeleans
Posts: 2,121
Likes: 0
Received 3 Likes
on
3 Posts
Re: Clearance Issue on Hatch with N1 and lowering springs (JdmEGHatch6)
i have the N1 on my eg with 450r g/c and agx set on 4 and i barely scrap. im also on 17's and the well is closed.
Thread
Thread Starter
Forum
Replies
Last Post
BoostinEJ1
Honda / Acura
10
04-13-2004 11:32 AM
BoostinEJ1
Honda Civic / Del Sol (1992 - 2000)
7
04-09-2004 06:11 AM