Cleanest Looking way to add wirings to 95 Civic w/GSR Swap
05-26-2009, 11:19 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Cleanest Looking way to add wirings to 95 Civic w/GSR Swap
Well since I need to add wirings for VTEC, VTEC oil, IAB, Knock sensor. What would you recommend for the most cleanest (not having any wirings expose) for this swap. I was thinking if maybe I can use a 95 GSR engine harness and have these subharness connected to the shock tower? and just have the wirings lead to the ECU? Im going to get it BAR'd so I need it to look stock and clean looking as possible. Dont want any wires expose.
05-26-2009, 11:41 PM
#2
Junior Member
Join Date: Mar 2009
Location: Citrus Heights, Ca
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleanest Looking way to add wirings to 95 Civic w/GSR Swap
Well since I need to add wirings for VTEC, VTEC oil, IAB, Knock sensor. What would you recommend for the most cleanest (not having any wirings expose) for this swap. I was thinking if maybe I can use a 95 GSR engine harness and have these subharness connected to the shock tower? and just have the wirings lead to the ECU? Im going to get it BAR'd so I need it to look stock and clean looking as possible. Dont want any wires expose.
05-27-2009, 02:54 AM
#5
Junior Member
Join Date: Aug 2006
Location: Harrison Twp, MI, usa
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleanest Looking way to add wirings to 95 Civic w/GSR Swap
Thread
Thread Starter
Forum
Replies
Last Post
hmtcrxsir
Honda Civic / Del Sol (1992 - 2000)
7
05-27-2009 06:00 PM
