Christmas Day FUN DONE finally!
#1
Moderator
Thread Starter
Christmas Day FUN DONE finally!
long story short....thought i had the wrong bearings but ended up being that the line bore was off .010 and deck was .004 off....so after some time at the machine shop for the 4th time....she is getting installed
will get an mpeg when car is running...
will get an mpeg when car is running...
#6
Re: Christmas Day FUN DONE finally! (redman223)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redman223 »</TD></TR><TR><TD CLASS="quote">Lookin good </TD></TR></TABLE>
Trending Topics
#10
Moderator
Thread Starter
Re: Christmas Day FUN DONE finally! (Typesi2nv)
https://honda-tech.com/zerothread?id=714210
setup is there.....and previous dyno plot is also there....
bumping compression .2
minus spoon tbody....
will add toda header next week and special intake manifold!
setup is there.....and previous dyno plot is also there....
bumping compression .2
minus spoon tbody....
will add toda header next week and special intake manifold!
#19
Moderator
Thread Starter
Re: (EJ1_519)
engine in car and running.....not bad for a days work...complete build and swap!! plus had to drill out 2 flywheel bolts (2 hour process)
so here it is
little 10 sec video clip!
http://www.we-todd-did-racing....DE%3D
so here it is
little 10 sec video clip!
http://www.we-todd-did-racing....DE%3D
#21
Re: Christmas Day FUN DONE finally! (chad)
whats a stunna without a showkaa engine!
too klean for chad if you ask me but ill still take him up for a ride and beers at eh expo
too klean for chad if you ask me but ill still take him up for a ride and beers at eh expo
#22
Moderator
Thread Starter
Re: Christmas Day FUN DONE finally! (b20bastard)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20bastard »</TD></TR><TR><TD CLASS="quote">whats a stunna without a showkaa engine!
too klean for chad if you ask me but ill still take him up for a ride and beers at eh expo </TD></TR></TABLE>
i wanted a clean ENGINE!!! beadblast owns joo
too klean for chad if you ask me but ill still take him up for a ride and beers at eh expo </TD></TR></TABLE>
i wanted a clean ENGINE!!! beadblast owns joo