chassis harness question
#1
Honda-Tech Member
Thread Starter
chassis harness question
I have a 94 civic dx hatchback that has been going through some changes.. We have added power windows,locks and mirrors.. We swapped out the dx chassis harness for a ex chassis harness.. The dash/door panels/switches/inside handels are from a gsr. Right now we are not wanting to cut any wires on this chassis harness, because we replaced all the harness in the car with uncut..
Now it is time for wiring of the doors for the window controllers,power mirrors and locks.. My buddy is picking up a integra with a uncut chassis harness and we are they about swapping in to my hatch. Now I know the rear harness will have to be repinned to match the dc2 chassis harness.
I have everything needs for the doors to work. Also would make the dc2 cluster I have plug and play now.. Now is the civic and integra under dash fuse box different?
So what all is really different from the integra and civic chassis harness? Other then repinning the taillight harness...
Now it is time for wiring of the doors for the window controllers,power mirrors and locks.. My buddy is picking up a integra with a uncut chassis harness and we are they about swapping in to my hatch. Now I know the rear harness will have to be repinned to match the dc2 chassis harness.
I have everything needs for the doors to work. Also would make the dc2 cluster I have plug and play now.. Now is the civic and integra under dash fuse box different?
So what all is really different from the integra and civic chassis harness? Other then repinning the taillight harness...
Thread
Thread Starter
Forum
Replies
Last Post
V/\ freestyle
Honda CRX / EF Civic (1988 - 1991)
7
03-13-2011 08:52 PM