CEL Issue
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: Da Big Ville, KY, USA
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
CEL Issue
TPS causes solid CEL light and wont pull codes when broken. This is not always the case. but it was mine. changed it out, and ran perfect.
Got a chipped ECU that is giving me a solid CEL. when i try and check it, the light blinks the 7 code forever, but when it flashes, it turns on for like 1/16 of a second then turns off, giving the code 7. NOW, ive done this procedure before, but this looks more like it "strobes" 7 not blinks the code 7. it seems way too fast. Also, it runs just fine, and my burnt maps are working correctly. Ive tried different chips as well. I have not changed the ECU yet though as I dont have 1 to try w/ 550 cc injectors. any advice or experiences owuld be nice to hear about. LMK..help me out! this is all I need for my turbo d16 to be complete.
Got a chipped ECU that is giving me a solid CEL. when i try and check it, the light blinks the 7 code forever, but when it flashes, it turns on for like 1/16 of a second then turns off, giving the code 7. NOW, ive done this procedure before, but this looks more like it "strobes" 7 not blinks the code 7. it seems way too fast. Also, it runs just fine, and my burnt maps are working correctly. Ive tried different chips as well. I have not changed the ECU yet though as I dont have 1 to try w/ 550 cc injectors. any advice or experiences owuld be nice to hear about. LMK..help me out! this is all I need for my turbo d16 to be complete.
Last edited by themorphious; 01-22-2010 at 05:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post