CEL: code 9
05-25-2005, 08:42 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Location: San Diego, CA, USA
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
CEL: code 9
Hey guys,
every few mornings when i start my car, my CEL comes on. Its throwing code 9,
CYP - cylinder sensor
Once my i turn my car off and back on, right there in my drive way, the CEL is gone, and a few days later it will come up again when i start my car
any ideas?
every few mornings when i start my car, my CEL comes on. Its throwing code 9,
CYP - cylinder sensor
Once my i turn my car off and back on, right there in my drive way, the CEL is gone, and a few days later it will come up again when i start my car
any ideas?
05-25-2005, 09:14 AM
#2
Member
05-28-2005, 10:14 AM
#5
Honda-Tech Member
Join Date: Oct 2002
Location: chicago burbs, Il, USA
Posts: 5,150
Likes: 0
Received 23 Likes
on
23 Posts
it could be a bad connection, have you checked all the connectors?
if it's not a connection problem, then yes you have to replace the sensor, and since you can't buy it seperate, the entire distributor needs to be replaced.
good news is you can sell off the parts to the distributor and make up a lot of what you spent on the new distributor.
if it's not a connection problem, then yes you have to replace the sensor, and since you can't buy it seperate, the entire distributor needs to be replaced.
good news is you can sell off the parts to the distributor and make up a lot of what you spent on the new distributor.
Thread
Thread Starter
Forum
Replies
Last Post
MumBleZ_94gsR
All Motor / Naturally Aspirated
2
09-01-2009 05:30 AM