CEL 6, 7, 9, 10
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: hastings, mi, 49058
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
CEL 6, 7, 9, 10
i just threw a 98+ R into my eg hatch and now i've got 4 cel's.
ect sensor, tps sensor, iat sensor and cyp sensor.
i'm going to try to hardwire the iat to the ecu as well as the tps and possibly the ect sensor, but what do i do about the cyp?
all dizzy wires match up according to manuals and charts. all connections were resoldered and taped and the car runs fine other than those cel's putting it in safe mode and running rich as hell fouling out plugs.
if people have had these problems before can you give me some insight on what my options are.
its a 95 cx, we used the stock cx harness and rewired the neccessary. upgraded from b16 so the car was already wired for b series vtec. now this. help!
ect sensor, tps sensor, iat sensor and cyp sensor.
i'm going to try to hardwire the iat to the ecu as well as the tps and possibly the ect sensor, but what do i do about the cyp?
all dizzy wires match up according to manuals and charts. all connections were resoldered and taped and the car runs fine other than those cel's putting it in safe mode and running rich as hell fouling out plugs.
if people have had these problems before can you give me some insight on what my options are.
its a 95 cx, we used the stock cx harness and rewired the neccessary. upgraded from b16 so the car was already wired for b series vtec. now this. help!
Thread
Thread Starter
Forum
Replies
Last Post