CEL 23 after driving

Reply Subscribe

Thread Tools

Search this Thread

09-03-2007, 11:33 AM

flatblack-h22

Honda-Tech Member

Thread Starter

Join Date: Feb 2006

Location: Srok Khmer, GA

Posts: 2,927

Likes: 1

Received 1 Like on 1 Post

CEL 23 after driving

OBD2 GSR, OBD1 Harness, P72
92 SI Hatch

okay i recently wired up the knock sensor to D3 and the cel went away. but after driving for awhile and the car warms up, it throws a cel. but if i turn the car off then back on its goes away for a moment and comes back.

Reply Like

09-03-2007, 12:08 PM

duggy

Honda-Tech Member

Join Date: Jun 2002

Location: Houston, TX, US

Posts: 765

Likes: 0

Received 0 Likes on 0 Posts

Either the knock sensor is bad, your wiring is trash, or the knock sensor is doing it's job.

Reply Like

09-03-2007, 12:32 PM

serio_ENDLESS

Honda-Tech Member

Join Date: Apr 2006

Location: las vegas, nv, usa

Posts: 184

Likes: 0

Received 0 Likes on 0 Posts

get the ecu chipped they will disable it for you

Reply Like

09-03-2007, 01:38 PM

ke98248

Honda-Tech Member

iTrader: (1)

Join Date: Feb 2007

Location: Snohomish County, WA

Posts: 3,683

Likes: 0

Received 0 Likes on 0 Posts

Re: (serio_ENDLESS)

That will only mask the problem, not solve it

Reply Like

09-03-2007, 07:41 PM

serio_ENDLESS

Honda-Tech Member

Join Date: Apr 2006

Location: las vegas, nv, usa

Posts: 184

Likes: 0

Received 0 Likes on 0 Posts

ALSO IF THE WIRE YOU RAN INTO YOUR ECU IT HAS TO BE FULL CONNECTION SUCH AS BEIND SOLDERED THE BROKEN WIRE MAY SENS A WRONG SIGNAL OR ITS DOING ITS JOB

Reply Like