can i ignore cel code 10 (IAT)?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: where cars dont get stolen, NY
Posts: 4,370
Likes: 0
Received 8 Likes
on
6 Posts
can i ignore cel code 10 (IAT)?
car is a 97 ex coupe with a built ls/vtec jumped to obd1.
i hardwired in the gsr iat and it has been running perfectly for a month and about 300 miles now all of a sudden on a ahrd pull today shifting at 7k from 1-4th the cel popped on and showed code 10.
what could this mean exactly? the sensor was brand new when i built the motor.
the car still seems to run/drive just fine....
lemme know what you think!
i hardwired in the gsr iat and it has been running perfectly for a month and about 300 miles now all of a sudden on a ahrd pull today shifting at 7k from 1-4th the cel popped on and showed code 10.
what could this mean exactly? the sensor was brand new when i built the motor.
the car still seems to run/drive just fine....
lemme know what you think!
#2
MiG-21 superfan
Join Date: Mar 2001
Location: near the ocean, Moderator City, NJ
Posts: 8,628
Likes: 0
Received 3 Likes
on
3 Posts
Re: can i ignore cel code 10 (IAT)? (killerpenguin21)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by killerpenguin21 »</TD></TR><TR><TD CLASS="quote">car is a 97 ex coupe with a built ls/vtec jumped to obd1.
i hardwired in the gsr iat and it has been running perfectly for a month and about 300 miles now all of a sudden on a ahrd pull today shifting at 7k from 1-4th the cel popped on and showed code 10.
what could this mean exactly? the sensor was brand new when i built the motor.
the car still seems to run/drive just fine....
lemme know what you think!</TD></TR></TABLE>
check wiring and check that the sensor doesn't have **** on the nipple. i'd never drive around w/o putting an effort into fixing it, but that's me and i'm supremely ****.
i hardwired in the gsr iat and it has been running perfectly for a month and about 300 miles now all of a sudden on a ahrd pull today shifting at 7k from 1-4th the cel popped on and showed code 10.
what could this mean exactly? the sensor was brand new when i built the motor.
the car still seems to run/drive just fine....
lemme know what you think!</TD></TR></TABLE>
check wiring and check that the sensor doesn't have **** on the nipple. i'd never drive around w/o putting an effort into fixing it, but that's me and i'm supremely ****.
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: where cars dont get stolen, NY
Posts: 4,370
Likes: 0
Received 8 Likes
on
6 Posts
Re: can i ignore cel code 10 (builthatch)
well i put in some effort lol and nothing changed...but i feel like on obd1 the iat doesnt real do much except during starting?
#4
Honda-Tech Member
Join Date: Aug 2006
Location: fort worth, tx, us
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: can i ignore cel code 10 (killerpenguin21)
this happen to me twice if you look at the sensor it melted so you have to get another one i dont really know what cause it to melt.. im guessing hot air flowing through the intake mani
#7
Honda-Tech Member
Re: can i ignore cel code 10 (IAT)?
Just a heads up for the future, check the dates on threads to see when they were originally posted. This one was started in 07' and has been dead since 08' Not a big deal but some guys like to be dicks and call you a stupid noob and be butthurt about it. I don't mind, It's obvious you were searching
Check this thread out
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/92-00-honda-engine-swap-wiring-guide-vtec-non-vtec-2987229/
Check this thread out
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/92-00-honda-engine-swap-wiring-guide-vtec-non-vtec-2987229/
Thread
Thread Starter
Forum
Replies
Last Post
all-mtr-teg
All Motor / Naturally Aspirated
9
01-27-2007 07:16 AM