Cabon dash for EG
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Carbon dash for EG
Ive been searching around and can not find a full carbon dash for an EG. I found some info when i searched on this forum but all of the pics are red x's and not working anymore since they are old posts. If someone could give me some website for custom carbon fiber pieces it would help and some pics installed... thanks
Modified by Ep1dem1c at 12:01 PM 5/14/2007
Modified by Ep1dem1c at 12:01 PM 5/14/2007
#4
Honda-Tech Member
Re: (Ep1dem1c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ep1dem1c »</TD></TR><TR><TD CLASS="quote">yea thats where i originally seen them. didnt know if it was a certain company that mass produced them or not.</TD></TR></TABLE>
they probably wasn't that much of a hit.
they probably wasn't that much of a hit.
Trending Topics
#16
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Re: (De_tour)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecnTurbo »</TD></TR><TR><TD CLASS="quote">fawken SWEET!
and if you can find out how much weight you save vs stock</TD></TR></TABLE>
No weight saved that i know of.... all they do is take the vinyl off and overlay the dash... more info is coming from them via email... hopefully i will be ordering in the next few weeks so i can post some install pics.
and if you can find out how much weight you save vs stock</TD></TR></TABLE>
No weight saved that i know of.... all they do is take the vinyl off and overlay the dash... more info is coming from them via email... hopefully i will be ordering in the next few weeks so i can post some install pics.
#19
Honda-Tech Member
Join Date: Mar 2007
Location: Weaksauce, UT
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
Re:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 305accord »</TD></TR><TR><TD CLASS="quote">how much is it gunna run you?</TD></TR></TABLE>
x2
x2
#20
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Re: (305accord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 305accord »</TD></TR><TR><TD CLASS="quote">how much is it gunna run you?</TD></TR></TABLE>
not sure yet waiting on a response right now... i am also looking into another company too.... fibercation.com they are pretty cheap
not sure yet waiting on a response right now... i am also looking into another company too.... fibercation.com they are pretty cheap
#21
Join Date: Apr 2006
Location: san antonio, tx, us of a
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Re: (De_tour)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by De_tour »</TD></TR><TR><TD CLASS="quote">Only reason id get such a dash would be to do some lines when im riding shotgun </TD></TR></TABLE>
<sniiiiiiiifff>
<sniiiiiiiifff>
#22
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Re: (sirsmokesalot)
piece by fibercation.... SICK! They can either overlay or they can make new molds and do full fiberglass/carbon pieces... to save weight but im not worried about that.