building my b18c jdm gsr motor for more boost
#1
Thread Starter
Join Date: Jul 2005
Location: ft. myers, fl, usa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
building my b18c jdm gsr motor for more boost
whats up new to this forum need help on building my motor for more boost what pistons, rods, ecu (hondata s?) should i use now i have a 97 civic ex with jdm gsr motor stock 10.6:1 compression, stock size cometic head gasket and race engineering block guard, dsm 450 cc inj. victor x manifold, bbk 255lph pump, turbonetics t3t4 kit with spearco front mount, p28 ecu custom tune from hrtuning.com apexi safc to lean it out alittle to an air/fuel of 11.0:1. 2.5 in downpipe 3in thermal research development exhaust tial wastegate and hallman manual boost controller. at 10 psi I made 280 whp and only 198.4 tq i bought this turbo kit from a friend who had it on his gsr which had some internals done, not sleeved hondata ecu dunno inj size and he made 360 whp at like 17-18 psi. need help deceiding what pistons, rods and ecu to use and whether my inj are big enough
Thread
Thread Starter
Forum
Replies
Last Post
ChronicGreenDC2
Forced Induction
21
06-29-2005 11:48 PM