20yrsToMidnight

I finally got around to doing some maintence on my dd which is a 92 civic dx, i was replacing the fuel filter and while doing that i managed to pinch and crack the line from the tank right at the end of the fitting that goes to the filter.. does anyone know how i could fix this? or am i going to have to buy a completely new line with the fitting on the end that goes into the filter?

2wheelhunter

you may have to take it to a garage unless ur knowledge is good with fuel/brake lines..

nighttrain33

Your best bet would probably be to replace that part of the line.

-Shane

20yrsToMidnight

I have no knoledge with fuel lines but everything else so i would like to do it myself... it was to dark for me to try and trace the line from outside the engine bay, but is it one continuous line? or is it in sections? could i just cut it at the crack and get a new fitting?

instrument

i would never touch a fuel line on my own i dont think...after seeing my moms accord turn into a fireball when the fuel line ruptured.

20yrsToMidnight

uh ok looking for some real answers.. ill have a extinguisher on hand of course.

20yrsToMidnight

anyone? so far from what ive seen in a diagram its all one line and it sounds like its going to be expensive as hell to fix.

s13_240sx_92

what did you end up doing? i have a similar problem.