Brand New R motor/EG hatch 1/4 mile times...
04-23-2003, 01:51 PM
#1
Honda-Tech Member
Thread Starter
Brand New R motor/EG hatch 1/4 mile times...
i know i hate when people ask me what kind of times their car will run with this mod...and that mod...etc.
however...i want to know what kind of times people have run with good running R motors in hatchbacks.
my setup will be as follows, and it will be running tomorrow.
Brand New R Cylinder Head (b18c5)
Brand New R Block (b18c5)
OEM headgasket
P30 Intake Manifold
B16A throttle Body
JDM ITR Transmission
4.78 FD
tuned properly with hondata or at least with a vafc in a few weeks...
what kind of times have some of the guys on here run with a similar setup?
i have full interior in my 92 civic hatchback and its a dx.
thanks, chet
however...i want to know what kind of times people have run with good running R motors in hatchbacks.
my setup will be as follows, and it will be running tomorrow.
Brand New R Cylinder Head (b18c5)
Brand New R Block (b18c5)
OEM headgasket
P30 Intake Manifold
B16A throttle Body
JDM ITR Transmission
4.78 FD
tuned properly with hondata or at least with a vafc in a few weeks...
what kind of times have some of the guys on here run with a similar setup?
i have full interior in my 92 civic hatchback and its a dx.
thanks, chet
04-23-2003, 01:53 PM
#2
Honda-Tech Member
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brand New R motor/EG hatch 1/4 mile times... (chet)
heh, bored today
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">4. This is NOT an e-racing forum. Threads asking who would win or what will my car run if...will be deleted immediately and points will be deducted from your user rating. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">4. This is NOT an e-racing forum. Threads asking who would win or what will my car run if...will be deleted immediately and points will be deducted from your user rating. </TD></TR></TABLE>
04-23-2003, 02:01 PM
#6
Honda-Tech Member
Thread Starter
Re: Brand New R motor/EG hatch 1/4 mile times... (BCRUZ)
because its all i can afford at this point.
i just spent 1400 on a new Head.
2050 on a new block.
like 400 on various other parts...
so like 4000 total....
i just spent 1400 on a new Head.
2050 on a new block.
like 400 on various other parts...
so like 4000 total....
04-23-2003, 02:02 PM
#7
Honda-Tech Member
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brand New R motor/EG hatch 1/4 mile times... (BCRUZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BCRUZ »</TD></TR><TR><TD CLASS="quote">why b16a intake mani and t/b?</TD></TR></TABLE>
i second that....
i second that....
Trending Topics
good luck with your project.
04-23-2003, 02:13 PM
#9
Member
Join Date: Feb 2002
Location: at the track
Posts: 5,962
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brand New R motor/EG hatch 1/4 mile times... (BCRUZ)
brand new b18c5 longblock. . . that must be so nice. 13.8 sounds about right in a full interior eg. What tires/wheels, bolts ons?
04-23-2003, 02:20 PM
#10
Honda-Tech Member
Thread Starter
Re: Brand New R motor/EG hatch 1/4 mile times... (743)
if i don't go 13.2's i'm going to be upset.
a friend of mine with b16a head/R bottom end went 13.2's with gsr transmission and OPEN differential.
and i went 14.5's with 142whp on vx wheels with 2.2 60 ft...and would have gone faster with the p30 ecu i switched to a few weeks after that.
as i made 152whp with p30 ecu over skunk2 chipped p28 ecu.
so again, i want 13.20's...
and i want to run 13.20's on 15inch falken azeni's.
a friend of mine with b16a head/R bottom end went 13.2's with gsr transmission and OPEN differential.
and i went 14.5's with 142whp on vx wheels with 2.2 60 ft...and would have gone faster with the p30 ecu i switched to a few weeks after that.
as i made 152whp with p30 ecu over skunk2 chipped p28 ecu.
so again, i want 13.20's...
and i want to run 13.20's on 15inch falken azeni's.
04-23-2003, 02:22 PM
#11
Honda-Tech Member
Join Date: Nov 2001
Location: CALIFORNIA
Posts: 15,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brand New R motor/EG hatch 1/4 mile times... (chet)
screw the azenis for drag... get something with a softer sidewall like BFgoodrich or something. You should hit lower than a 13.8. I hit a 13.8 in a DX coupe with a USDM B18C1, open exhaust cut out and CTR cams.
05-26-2003, 11:48 AM
#12
Junior Member
Join Date: Oct 2002
Location: Ventura, California, USA
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brand New R motor/EG hatch 1/4 mile times... (B.CRUZ)
I was wondering if I could find out what your guy's method's are for launching on street tires with a b18c5 motor "modified or not" ? Like what RPM, type of clutch you have, tire pressure, how do you use the clutch? And what 60' and 1/4 or 1/8 that got you. Please be detailed thanks.
Thread
Thread Starter
Forum
Replies
Last Post
slow hatch
Honda CRX / EF Civic (1988 - 1991)
4
01-22-2003 08:10 PM
SonicDark
Acura Integra Type-R
38
09-13-2001 12:41 PM
