brake line help!!!! needed asap!
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: union city, nj, america
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
brake line help!!!! needed asap!
so i got my motor out and im doing a wire tuck.... now my problem is i don't like how the brake lines look, i want to change all the hard lines to steel braided.... a lot of people say its unsafe but thats already been proven wrong... my question is what exactly are all the parts and stuff called that im going to need to do it... i found a couple forums on here but im new and don't know how to send pms on this site yet... could anybody send me a forum with what i need or a write up? oh by the way my car is none ABS 94 civIc
#2
Honda-Tech Member
Join Date: Apr 2005
Location: Los Angeles
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
all the answers to your questions are in this thread
https://honda-tech.com/zerothread?id=1693934
but make sure you read first. you can't send pm's yet cause you're a trial user so you'll have to wait until you dont have any restrictions
https://honda-tech.com/zerothread?id=1693934
but make sure you read first. you can't send pm's yet cause you're a trial user so you'll have to wait until you dont have any restrictions
#4
Junior Member
Thread Starter
Join Date: Nov 2007
Location: union city, nj, america
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
now if i was to use hard lines of the same size that honda uses, could i use my old fittings... or atleast as a "template" to show the guy in the store what size fittings i need?
Thread
Thread Starter
Forum
Replies
Last Post
94EGKUSH
Honda Civic / Del Sol (1992 - 2000)
4
12-29-2008 10:50 PM