DerangedEG

I searched the "Brake" thread and read and read but It centerd on EKs..so I have a few issues with some brake swaps for an EG. I am putting a 99-00 Si full brake swap onto a 93 EG Coupe. I have the trailing arms, knuckles rotrs etc etc from the Si.

I located a 93 DelSol Si 4 wheel disc Proportioning valve and I was going to grab a 15/16th master cylinder from a 4 door 92-95 Ex/Lx Civic at the salvage yard.

QUESTION HERE: What civic's came with 15/16th MC's. Are these ABS cars, can I use the 15/16th MC from this civic on mine. I do not see why not. The lines match up and the bigger MC would take some travel out of the pedal.? Am I correct.?

CXHatchback

The 92-95 civics only came with either 7/8" or 13/16" MC. Get one from a 91 civic EX, it's 15/16" and will bolt right up supposedly. You can't get one from a car with abs.

B_CRUZ!

I am using the 15/16 one from a 91 EX 4 door. bolts right up to a 92-95 CX.

DerangedEG

Ok thanks guys.