Bought a new car today!!!
12-01-2003, 03:09 PM
#1
New User
Thread Starter
Join Date: Dec 2000
Location: st pete, fl, usa
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Bought a new car today!!!
Well as most of us know John (Vapor) is selling his project car, well not anymore I bought it today!!! 
I can't wait to get this project rolling! I now have the 2 major components, the motor( which is being sent out for sleeves and 84mm bore) and the car. I am grinning from ear to ear right now. Not just because i have a project car but i was also able to help John out which also means a lot to me.
THANKS JOHN
EDIT: Maybe i should tell you whatis on the car!!!
Driveshaftshop.com Stage 4 axles with hubs
Extended lug studs
1997 Integra non VTEC 4 door Citrus Silver paint
5 Zigen front lip
Painted side skirts
Red/Clear tail lights
Full amber corner lamps
Carbon fiber hood
Rear discs from a 94 Integra
Cross drilled Brembo rotors
AEM pads
Apex-i N1 99 Spec Coilovers
Note: The car no longer has those wheels on it, it now has steelies. Also the ITR front seats were removed so i could afford it.
And the motor that is being built for boost to power this beast!
Check out my other parts/pics i have for the build!
A lot of people have been asking what I am doing in my build process for this car.
GE sleeves 84mm bored decked honed and O-ringed
CP 9:1 pistons with full race rods
ITR sprins and valves with titanium retainers for the head
Turbo setup: SC61, Full race manifold, Tial 40mm wg and tial BOV, custom piping from SS, precision IC, Bosch fuel pump, 880cc inj, GE fuel rail, aeromotive FPR
I am sure there is stuff i am leaving out, it is early and i have to go to class i will add the rest later.
Modified by DroppedGSR at 8:29 PM 12/1/2003
Modified by DroppedGSR at 8:30 PM 12/1/2003
Modified by DroppedGSR at 10:51 AM 12/2/2003
I can't wait to get this project rolling! I now have the 2 major components, the motor( which is being sent out for sleeves and 84mm bore) and the car. I am grinning from ear to ear right now. Not just because i have a project car but i was also able to help John out which also means a lot to me. THANKS JOHN
EDIT: Maybe i should tell you whatis on the car!!!
Driveshaftshop.com Stage 4 axles with hubs
Extended lug studs
1997 Integra non VTEC 4 door Citrus Silver paint
5 Zigen front lip
Painted side skirts
Red/Clear tail lights
Full amber corner lamps
Carbon fiber hood
Rear discs from a 94 Integra
Cross drilled Brembo rotors
AEM pads
Apex-i N1 99 Spec Coilovers
Note: The car no longer has those wheels on it, it now has steelies. Also the ITR front seats were removed so i could afford it.
And the motor that is being built for boost to power this beast!
Check out my other parts/pics i have for the build!
A lot of people have been asking what I am doing in my build process for this car.
GE sleeves 84mm bored decked honed and O-ringed
CP 9:1 pistons with full race rods
ITR sprins and valves with titanium retainers for the head
Turbo setup: SC61, Full race manifold, Tial 40mm wg and tial BOV, custom piping from SS, precision IC, Bosch fuel pump, 880cc inj, GE fuel rail, aeromotive FPR
I am sure there is stuff i am leaving out, it is early and i have to go to class i will add the rest later.
Modified by DroppedGSR at 8:29 PM 12/1/2003
Modified by DroppedGSR at 8:30 PM 12/1/2003
Modified by DroppedGSR at 10:51 AM 12/2/2003
12-01-2003, 04:37 PM
#5
Join Date: Nov 2002
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bought a new car today!!! (DroppedGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DroppedGSR »</TD></TR><TR><TD CLASS="quote">
1997 Integra non VTEC 4 door Citrus Silver paint
</TD></TR></TABLE>
Hate to be the one to break the news to you...But that is a civica, not an integra.
Just kidding. Nice looking car and keep us updated on all your future mods. Are the seats in the pictures the ones in the car right now? They look awesome with the exterior! The engine going in looks superb as well.
1997 Integra non VTEC 4 door Citrus Silver paint
</TD></TR></TABLE>
Hate to be the one to break the news to you...But that is a civica, not an integra.
Just kidding. Nice looking car and keep us updated on all your future mods. Are the seats in the pictures the ones in the car right now? They look awesome with the exterior! The engine going in looks superb as well.
12-01-2003, 04:46 PM
#6
New User
Thread Starter
Join Date: Dec 2000
Location: st pete, fl, usa
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
there are currently no front seats...I am getting race seats and didnt want to bother with any others...especially since it wont run till summer!
Trending Topics
12-02-2003, 06:05 AM
#15
New User
Thread Starter
Join Date: Dec 2000
Location: st pete, fl, usa
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
He is selling the motor seperately. All i bought was the shell, with the listed mods above. This is exactly what i wanted so it works out for the both of us!
12-02-2003, 06:39 AM
#18
Honda-Tech Member
Join Date: Aug 2003
Location: Ottawa, Ontario, Canada
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
12-08-2003, 04:32 PM
#23
New User
Thread Starter
Join Date: Dec 2000
Location: st pete, fl, usa
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Well the motor made it to GE and it is getting the new HD sleeves and bored to 84mm. I can't wait. Also the head is being redone with Fererra valves, titanium retainers and ITR springs!
Thread
Thread Starter
Forum
Replies
Last Post