boosting problem help mee!!......please
06-23-2008, 04:14 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: HOUSTON TX
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
boosting problem help mee!!......please
ok so heres the set up,
d16y8 8.5:1 compression, turbonetics turbo, tial wastegate. running 14 psi.
after leting off the throttle excess boost is back feeding out the turbo, then the bov opens just for a split second. as i watch the boost gauge i notice vacuum drops a little slow. i have tried every vacuum source on the engine. looking for anyone who can help me out. im very frustrated, oh yah and its a greddy type-r bov brand new. ive always had this problem. turbo is brand new and i dont wanna mess it up, meaning i cant enjoy the power this lil single cam has. please help me out peeps!!
Modified by inovative91 at 5:19 AM 6/24/2008
d16y8 8.5:1 compression, turbonetics turbo, tial wastegate. running 14 psi.
after leting off the throttle excess boost is back feeding out the turbo, then the bov opens just for a split second. as i watch the boost gauge i notice vacuum drops a little slow. i have tried every vacuum source on the engine. looking for anyone who can help me out. im very frustrated, oh yah and its a greddy type-r bov brand new. ive always had this problem. turbo is brand new and i dont wanna mess it up, meaning i cant enjoy the power this lil single cam has. please help me out peeps!!
Modified by inovative91 at 5:19 AM 6/24/2008
06-23-2008, 07:26 PM
#2
Honda-Tech Member
Join Date: Mar 2008
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: boosting problem help mee!!......please (inovative91)
not to be an a$$hole but there is a forced induction forum...you will get a lot more feedback with people that may have had the same problems you had
Thread
Thread Starter
Forum
Replies
Last Post
