rhdcivic05

i have a ebay kit and it had a manual boost controller and i need to run what lines

z6hatchboy

do it like this, put a "t" in the stock fuel pressure regulator vacuum line. Run a vacuum line off that and on the new line have a "t" in the middle that goes to your mbc (boost controller) and the other end of the new vac. line can go to the blow off valve. With my mbc the vac source goes to the bottom and the side port goes to the waste gate. I have a TiAl w/g, if yours is that style the side port is for your mbc connection, the top port is for a auto controller