Bolt up question...is this right?
02-16-2004, 02:23 PM
#1
Thread Starter
Join Date: Jan 2004
Location: Charlottesville, Va, United States
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Bolt up question...is this right?
I blew the head on my gsr a couple of weeks ago and I'm putting a b16 head port and polished all skunk2 internals in it. I had a guy at a local parts shop tell me that I would have to do some drilling to get the head to line up with the gsr block. Is this right? Any help would be greatly appreciated.
02-16-2004, 02:57 PM
#5
Honda-Tech Member
Join Date: Oct 2003
Location: Roanoke A.K.A. Redneckville,VA
Posts: 4,012
Likes: 0
Received 1 Like
on
1 Post
Re: Bolt up question...is this right? (sillvercivicgsr)
the shop is smokin crack.it bolts right on.here;s a great article about-it's using a Type-R head,but it and the B16 are the same basic part.
http://hybrid2.honda-perf.org/....html
chris
http://hybrid2.honda-perf.org/....html
chris
02-16-2004, 02:59 PM
#6
Honda-Tech Member
Join Date: Jan 2003
Location: A Mile High
Posts: 2,863
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bolt up question...is this right? (TeamNextGenChris)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeamNextGenChris »</TD></TR><TR><TD CLASS="quote">the shop is smokin crack.it bolts right on.here;s a great article about-it's using a Type-R head,but it and the B16 are the same basic part.
http://hybrid2.honda-perf.org/....html
chris</TD></TR></TABLE>
I don't know why I didn't respond earlier but **** yeah it bolts right up.
http://hybrid2.honda-perf.org/....html
chris</TD></TR></TABLE>
I don't know why I didn't respond earlier but **** yeah it bolts right up.
Thread
Thread Starter
Forum
Replies
Last Post
Slimm-rw-
Tech / Misc
5
12-07-2004 08:31 PM