BLOWN PISTON RING I THINK. NEED HELP!!!! STUCK IN PHILLY!!!
#1
Thread Starter
Join Date: Sep 2005
Location: levittown, pa, us
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
BLOWN PISTON RING I THINK. NEED HELP!!!! STUCK IN PHILLY!!!
Ok i bought this turbo civic with a b18c-1 engine in it. the guy said when i got it that one of the rings was blown. Based simply on the fact that there is oil on the one spark plug. Based on this I ordered new rings and a friend was supposed to do the job. he took most of the enigine apart and now he is nowhere to be found. I have no clue what im doing. this is my first honda. I need to get this back together so i can get it back to LA where i live. Im in philly now. What I need is either someone in the area who knows how this who can do the job, or instructions on how to do it myself. To be honest im not 100% sure that the ring is bad. I was told that sometimes when you put synthetic oil in these cars it causes blowby. is there any truth in that? The former owner stated that it only started doing this after he put synthetic oil in. Can ANYONE help?
Modified by Naijablue at 9:52 AM 10/17/2005
Modified by Naijablue at 9:52 AM 10/17/2005
#3
Honda-Tech Member
Re: BLOWN PISTON RING I THINK. NEED HELP!!!! STUCK IN PHILLY!!! (RedEK9)
why dont u tell us what exactly has been taken apart first? and we'll start from there....
#4
Thread Starter
Join Date: Sep 2005
Location: levittown, pa, us
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: BLOWN PISTON RING I THINK. NEED HELP!!!! STUCK IN PHILLY!!! (D21X)
I managed to get it more or less together in the past day. But im still screwed as far as the problem.
#5
Honda-Tech Member
Join Date: Sep 2004
Location: Philadelphia
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: BLOWN PISTON RING I THINK. NEED HELP!!!! STUCK IN PHILLY!!! (Naijablue)
i live a mile or two from levittown. If thats were you are. Does the car run at all?
#6
Thread Starter
Join Date: Sep 2005
Location: levittown, pa, us
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: BLOWN PISTON RING I THINK. NEED HELP!!!! STUCK IN PHILLY!!! (TurboTagTeam)
Its back together, but I am yet to turn it over. I would love some help. I have to get home! and yes im in levittown
Trending Topics
#13
Thread Starter
Join Date: Sep 2005
Location: levittown, pa, us
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Naijablue)
ok compression is looking normal. but now i have a new problem. it will not start at all and for some reason when i tried to start it it fired the dip stick right out. what the hell does this mean?
#15
Re: (94eGsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94eGsr »</TD></TR><TR><TD CLASS="quote">it means blow by like a mother
try a leak down test</TD></TR></TABLE>
which probably means your rings are still blown
try a leak down test</TD></TR></TABLE>
which probably means your rings are still blown
#16
Thread Starter
Join Date: Sep 2005
Location: levittown, pa, us
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jeterkm02)
OK, i just tried to start it again, and not only did it shoot the dip stick out but also the valver cover gasket came out in the front followed by a loud popping sound and a little smoke
#22
Thread Starter
Join Date: Sep 2005
Location: levittown, pa, us
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Naijablue)
I think i am going to have to attempt to do this myself, how hard of a project is this anyway? If i dont have this figured out by wed i am going to have to sell the car and just go back to LA without it. Which i would hate to do.
#23
Honda-Tech Member
Join Date: Jul 2005
Location: SoCal
Posts: 3,090
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Naijablue)
just toss in some cheapo d15, drive it home with the b18 in the hatch, and then tear the engine apart here, or sell it to me *** is for cheapo. But at least buy a d15 for like 100 bucks and throw it in to drive.
#24
Honda-Tech Member
iTrader: (5)
Join Date: Jul 2005
Location: Cali
Posts: 2,791
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Naijablue)
man, just buy a helms manual from ebay for about $2 and take your **** apart. At worst, hire a tow company to tow your **** to the nearest person who can help. I would say look in FAQ but i dont think that there is a FAQ page on piston rings....I'd post up my helms manual but H-T got introuble from Helms about that.....Helms and their damn copyright issues, I mean just because they wrote the book and took apart a car to write it doesnt mean they can control me giving their $70 book, bought for $1 off of ebay, to you for free, damn commie helms!!!! j/k
#25
Honda-Tech Member
iTrader: (5)
Join Date: Jul 2005
Location: Cali
Posts: 2,791
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Eyal 951)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eyal 951 »</TD></TR><TR><TD CLASS="quote">just toss in some cheapo d15, drive it home with the b18 in the hatch, and then tear the engine apart here, or sell it to me *** is for cheapo. But at least buy a d15 for like 100 bucks and throw it in to drive. </TD></TR></TABLE>
If he had the know-how to do an engine swap i would think he would have the know-how to change piston rings. to your idea. Just tow it if you dont know what your doing.
If he had the know-how to do an engine swap i would think he would have the know-how to change piston rings. to your idea. Just tow it if you dont know what your doing.