Block #'s
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: oakland, ca, usa
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Block #'s
ok guys.... my cousin just bought a damn GS-R motor from a shop that i specifically told him not to mess with, thanks to my friends stupid encouragment my cousin bought the change over ....
here's the scinerio, i went by the shop and saw a customer car in there... i go there reguarly so i know the ship the shop owner be pulling off.... the guy who brought the car in had a messed up pulley, it wobbles... so im assuming the crank is fucked up...
to make a long story short do you guys know any sites that i can run the #'s on the block to see if its that same motor the owner of the shop pulled out from the customers car?
thanks in advance..... btw the whole change over was 2 grand....so i know theres a catch....
here's the scinerio, i went by the shop and saw a customer car in there... i go there reguarly so i know the ship the shop owner be pulling off.... the guy who brought the car in had a messed up pulley, it wobbles... so im assuming the crank is fucked up...
to make a long story short do you guys know any sites that i can run the #'s on the block to see if its that same motor the owner of the shop pulled out from the customers car?
thanks in advance..... btw the whole change over was 2 grand....so i know theres a catch....
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: oakland, ca, usa
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: Block #'s (TEAM JSJ)
i dont wanna give away the shop name, i still get parts from then at good prices(used parts) but its in oakland....
#4
Honda-Tech Member
Re: Block #'s (DOHCtorTHRUST)
2g's for an entire gsr swap?
hahaha your cousin is gonna get screwed.
remember. if it looks too good to be true. it probably is.
espically if your getting a 3300$ swap from a SHOP for 2,000$.
hahaha your cousin is gonna get screwed.
remember. if it looks too good to be true. it probably is.
espically if your getting a 3300$ swap from a SHOP for 2,000$.
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: oakland, ca, usa
Posts: 1,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: Block #'s (KAMiN)
no need to tell me that bro.... i'm not a newb.... remember that.....! i just want to find out a site that i can run the numbers so i can be sure that it came outta that car.... that shop had a couple of motors laying around....
Thread
Thread Starter
Forum
Replies
Last Post
turbotime
Forced Induction
21
03-24-2006 05:33 PM