Biggest motor
#3
bored and stroked k24"A2" should be like 2.6 or higher with like a 7K redline... and thats only if you wanna stay inline-4! there is always the 3.x V-6's!! the possibilities are endless, may the force be with you
#4
Re: Biggest motor (BlueIntegraBoy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy »</TD></TR><TR><TD CLASS="quote">K24</TD></TR></TABLE>
that would be the conservative route
that would be the conservative route
#5
HT Order of Merit
Re: Biggest motor (spracer03)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spracer03 »</TD></TR><TR><TD CLASS="quote">bored and stroked k24"A2" should be like 2.6 or higher with like a 7K redline... and thats only if you wanna stay inline-4! there is always the 3.x V-6's!! the possibilities are endless, may the force be with you</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spracer03 »</TD></TR><TR><TD CLASS="quote">
that would be the conservative route</TD></TR></TABLE>
Ok without MAJOR fabrication, the K24 is the largest motor you can fit in an EK.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spracer03 »</TD></TR><TR><TD CLASS="quote">
that would be the conservative route</TD></TR></TABLE>
Ok without MAJOR fabrication, the K24 is the largest motor you can fit in an EK.
#6
Junior Member
Join Date: Mar 2005
Location: Hanamalo, Hi, USA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Re: Biggest motor (ImportNewB)
D15B, end of story. there is a FAQ where u can look for possible swaps that are sticky'd at the top of the forums. maybe use it to find out more.
#7
Re: Biggest motor (JDM_Ej)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_Ej »</TD></TR><TR><TD CLASS="quote">
Ok without MAJOR fabrication, the K24 is the largest motor you can fit in an EK.</TD></TR></TABLE>
yeah, i was being a lil.. ok, very extreme with my post.. i've actually never seen a 3.x in a civic i dont know why it popped into my head
Ok without MAJOR fabrication, the K24 is the largest motor you can fit in an EK.</TD></TR></TABLE>
yeah, i was being a lil.. ok, very extreme with my post.. i've actually never seen a 3.x in a civic i dont know why it popped into my head
Trending Topics
#8
Unceasing Measure
Re: Biggest motor (spracer03)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spracer03 »</TD></TR><TR><TD CLASS="quote">yeah, i was being a lil.. ok, very extreme with my post.. i've actually never seen a 3.x in a civic i dont know why it popped into my head</TD></TR></TABLE>
I have.
I have.
#9
Honda-Tech Member
Re: Biggest motor (Archidictus)
i seen a v6 in a 4 dr civic. 3.2 turbocharged rear wheel drive. it was a for sale post, but then again it coulda been fake. go with the k24 with a k20 head
#11
Honda-Tech Member
you can just stick with the k20a2 and still fly your way past V8's man...haha...though i just talked to a guy who did the k24 setup with his Ej1..and he took V8's all day...
#14
Honda-Tech Member
Join Date: Mar 2006
Location: Danbury, CT, USA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: (bmoua)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bmoua »</TD></TR><TR><TD CLASS="quote">you can just stick with the k20a2 and still fly your way past V8's man...haha...though i just talked to a guy who did the k24 setup with his Ej1..and he took V8's all day...</TD></TR></TABLE>
ehh? explain that? you shouldn't generalize V8's.. haha. please elaborate which v8s you beat. like the Taurus SHO V8? =]
ehh? explain that? you shouldn't generalize V8's.. haha. please elaborate which v8s you beat. like the Taurus SHO V8? =]
#15
Unceasing Measure
Re: (ilumo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ilumo »</TD></TR><TR><TD CLASS="quote">ehh? explain that? you shouldn't generalize V8's.. haha. please elaborate which v8s you beat. like the Taurus SHO V8? =]</TD></TR></TABLE>
Poorly driven LS1 cars are in the low-14 range. Well driven LS1 cars are in the low-13 range. Well driven LS1 cars with lid/longtubes/full exhaust are in the mid-12's. Well driven LS1 cars on the juice are easy 11's.
A well driven K24 (TSX, not Accord/Element/CRV) EG can do mid-13's pretty consistantly on street tires, snap some bolt-on's in there and you can see 12's. From a roll they're much more devastating, but it's hard to get out of the hole with that much torque in a front-drive car.
Then again, you haven't told us what your plans are for this car, so I can only assume that you're a simple ricer who wants to street race Dodge Dakota RTs and that kid with the GT Mustang who picks on you at school.
Poorly driven LS1 cars are in the low-14 range. Well driven LS1 cars are in the low-13 range. Well driven LS1 cars with lid/longtubes/full exhaust are in the mid-12's. Well driven LS1 cars on the juice are easy 11's.
A well driven K24 (TSX, not Accord/Element/CRV) EG can do mid-13's pretty consistantly on street tires, snap some bolt-on's in there and you can see 12's. From a roll they're much more devastating, but it's hard to get out of the hole with that much torque in a front-drive car.
Then again, you haven't told us what your plans are for this car, so I can only assume that you're a simple ricer who wants to street race Dodge Dakota RTs and that kid with the GT Mustang who picks on you at school.
#16
Honda-Tech Member
Join Date: Jun 2004
Location: Seattle
Posts: 6,416
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Archidictus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">
Then again, you haven't told us what your plans are for this car, so I can only assume that you're a simple ricer who wants to street race Dodge Dakota RTs and that kid with the GT Mustang who picks on you at school.
</TD></TR></TABLE>
Funniest thing I've read all day, and probably the most correct.
I'd say nsx motor ftw since he never mentioned a budget
Then again, you haven't told us what your plans are for this car, so I can only assume that you're a simple ricer who wants to street race Dodge Dakota RTs and that kid with the GT Mustang who picks on you at school.
</TD></TR></TABLE>
Funniest thing I've read all day, and probably the most correct.
I'd say nsx motor ftw since he never mentioned a budget
#18
Member
Join Date: Mar 2004
Location: Somewhere to anywhere, Ca
Posts: 4,982
Likes: 0
Received 6 Likes
on
3 Posts
Re: (posite)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by posite »</TD></TR><TR><TD CLASS="quote">dont forget the h22a </TD></TR></TABLE>
The h22 is in a much lower league than the k series, especially the k24's. The transmission is a pile of ****, it's pretty damned heavy, and doesn't respond to bolt-ons nearly as well as the k series engines do.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">Then again, you haven't told us what your plans are for this car, so I can only assume that you're a simple ricer who wants to street race Dodge Dakota RTs and that kid with the GT Mustang who picks on you at school.</TD></TR></TABLE>
The h22 is in a much lower league than the k series, especially the k24's. The transmission is a pile of ****, it's pretty damned heavy, and doesn't respond to bolt-ons nearly as well as the k series engines do.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">Then again, you haven't told us what your plans are for this car, so I can only assume that you're a simple ricer who wants to street race Dodge Dakota RTs and that kid with the GT Mustang who picks on you at school.</TD></TR></TABLE>
#20
Honda-Tech Member
Join Date: May 2005
Location: Minneap
Posts: 1,655
Likes: 0
Received 0 Likes
on
0 Posts
Re: Biggest motor (ImportNewB)
k24 is probably the most REALISTIC way to get big displacement. however a 2.3liter b18 is my personal favorite. and about the same price as a k20
#21
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2005
Location: lubbock, tx
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SOHC4life 96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC4life 96 »</TD></TR><TR><TD CLASS="quote">
The h22 is in a much lower league than the k series, especially the k24's. The transmission is a pile of ****, it's pretty damned heavy, and doesn't respond to bolt-ons nearly as well as the k series engines do.
</TD></TR></TABLE>
agree with what you say but the prelude lover in me will die hard
The h22 is in a much lower league than the k series, especially the k24's. The transmission is a pile of ****, it's pretty damned heavy, and doesn't respond to bolt-ons nearly as well as the k series engines do.
</TD></TR></TABLE>
agree with what you say but the prelude lover in me will die hard
#22
Junior Member
Join Date: Feb 2005
Location: San Mateo, CA, USA
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
K24 straight up. Just out of curiosity does anyone know what kind of mpg you get with that swap? Since you are fairly daily drivable with that engine until you do some major modifications.
#23
Mr. Indecisive
Re: (Kaji)
im drunk and my answer is search, i cant believe anyone hasent said that...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kaji »</TD></TR><TR><TD CLASS="quote">K24 straight up. Just out of curiosity does anyone know what kind of mpg you get with that swap? Since you are fairly daily drivable with that engine until you do some major modifications.</TD></TR></TABLE>
prob slightly better numbers than a tsx, but it also depends on the trans, once again i havent heard about $$ so i assume he will have the 6 speed, and i have no idea what the ratios are on those gears
i think your right Archidictus on that ricer statement
Happy st pats day
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kaji »</TD></TR><TR><TD CLASS="quote">K24 straight up. Just out of curiosity does anyone know what kind of mpg you get with that swap? Since you are fairly daily drivable with that engine until you do some major modifications.</TD></TR></TABLE>
prob slightly better numbers than a tsx, but it also depends on the trans, once again i havent heard about $$ so i assume he will have the 6 speed, and i have no idea what the ratios are on those gears
i think your right Archidictus on that ricer statement
Happy st pats day