Best swap with the following parts
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: Ottawa, On, Canada
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Best swap with the following parts
89 DX, running right now
I have a complete d16a6 (needs a rebuild)
I have a d16z6, head, block...no distro or ECU or IM
I have the MPFI wire harness
I have the resistor box
I have 2 d16a6 ECUs
and I have the stock d15.
I was curious about swapping the z6 head on the d15, apparently the d15's rod ratios make it quite powerful. (puts out power till 8K), then there's the option of the d16z6 block and head with the a6 IM.
Or I could put the d16a6 or z6 block with z6 head with the d15 pistons (for higher compression)
In anycase, this is my winterbeater, so I'd like to stick with the parts I have.
THanks in advance.
I have a complete d16a6 (needs a rebuild)
I have a d16z6, head, block...no distro or ECU or IM
I have the MPFI wire harness
I have the resistor box
I have 2 d16a6 ECUs
and I have the stock d15.
I was curious about swapping the z6 head on the d15, apparently the d15's rod ratios make it quite powerful. (puts out power till 8K), then there's the option of the d16z6 block and head with the a6 IM.
Or I could put the d16a6 or z6 block with z6 head with the d15 pistons (for higher compression)
In anycase, this is my winterbeater, so I'd like to stick with the parts I have.
THanks in advance.
#3
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: Ottawa, On, Canada
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best swap with the following parts (94blackhatch)
my bad...can someone delete this...sorry
Modified by Jet Black at 1:18 AM 2/19/2004
Modified by Jet Black at 1:18 AM 2/19/2004
Thread
Thread Starter
Forum
Replies
Last Post
Beasty91Hatchy
Honda CRX / EF Civic (1988 - 1991)
8
10-28-2010 01:51 AM
Jet Black
Honda CRX / EF Civic (1988 - 1991)
16
02-25-2004 05:58 AM