d16why

Ok so it's taken me years to finish my project car. I can see the light!! I recently tried to drop in my b20 in my 96 civic coupe ex and i came across a problem... I couldn't fit it in...my tranny side and driver side mounts where about 2 inches off. I don't really know why. I have a gsr tranny that needed the gsr rear mount which i put on. Is this causing the mounting points to shift a couple of inches??! I need help pllllleeeeeeaaaasseee. Anyone. I will try to send pics when I get my camera to explain my dilenma.

b204dr

my b20 fit in my 00 fine with gsr tranny - im using a different rear mount but i think you just need to rock the motor

d16why

Which rear mount are you using on your swap!?

GapxGuy

You need the rear and tranny mount from the 99-00 Si.

^CX_d16

ay you need the rear t-bracket from a 99-00 si

b204dr

99 si rear mount/surrounded by ls mounts

d16why

Thanks for the information fellas, must appreciation

BLANKS143

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b204dr &raquo;</TD></TR><TR><TD CLASS="quote">99 si rear mount/surrounded by ls mounts </TD></TR></TABLE>

ditto