B16A MSD 6AL Installation
#1
Thread Starter
Join Date: Jul 2003
Location: San German, PR, USA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
B16A MSD 6AL Installation
Ok Here is my question.
I have an 87 B16A powered CRX. My mods are
PR3 ECU (Mugen programmed Chip). 2.25 exhaust piping ,a k&n air filter and a wallbro fuel pump.
I just installed an MSD 6AL. I gapped the plugs to .050 as the MSD instructions recommend. It’s that the correct amount of gap or it’s too big.
I tested the car at the street and when it comes around 7500 rpm its stats to surge like it needs more fuel or something.
I will appreciate all your help
I have an 87 B16A powered CRX. My mods are
PR3 ECU (Mugen programmed Chip). 2.25 exhaust piping ,a k&n air filter and a wallbro fuel pump.
I just installed an MSD 6AL. I gapped the plugs to .050 as the MSD instructions recommend. It’s that the correct amount of gap or it’s too big.
I tested the car at the street and when it comes around 7500 rpm its stats to surge like it needs more fuel or something.
I will appreciate all your help
Thread
Thread Starter
Forum
Replies
Last Post