brent_G

Alright tried to start my b16 in my hatch today...first time since i did the swap. Alright it ran really rough with gasing for like 20 seconds...when i felt the headers. Only cylinder 1 and 2 were firing. Alright what are my possibilties of somethign being wrong? for one i saw i have a head gasket leak...pissed about that. 2 i dont know anything about this motor. SO give me some ideas...

thashadow

check fuel pump, distributor, spark plugs....

my b16 gives me probs every once in a while.

Turbo EX

Make sure the plug wires are in the right cylinders, are all the injectors working?

01-0720

check all and any ground wires sounds stupid but it will make a
big difference. It always can be somthing stupid with hondas goodluck

The_Head

I had to replace my internal coil on the distributor yesterday, but you had 2 cylinders firing... so it probably isnt a bad coil

sammysnakes

sounds like you have bad cables and/or plugs

DOHCtorTHRUST

change the injectors....... i had the same problem since my motor was siting on a crate for who knows how long....... once i changed it, the motor ran fine..... if it still doesnt work, do a vavle adjustment...... maybe the valves arent openening....

brent_G

thanks for all your help fellas ill try all of the above.

95hatchy

check the firing order and timing and make the dist. is the same generation
good luck
my gave me troubles too

Kamin

replace the spark plugs!