b16 header fitment

Reply Subscribe

Thread Tools

Search this Thread

01-28-2010, 04:32 PM

Luca

Honda-Tech Member

Thread Starter

Join Date: Dec 2008

Posts: 36

Likes: 0

Received 0 Likes on 0 Posts

b16 header fitment

Found out that my header has a crack on it, and found a good price on a b18 comptech header 4-2-1 for sale. Was curious if there would be any fitment issues on my b16a2

Reply Like

01-30-2010, 04:11 PM

Luca

Honda-Tech Member

Thread Starter

Join Date: Dec 2008

Posts: 36

Likes: 0

Received 0 Likes on 0 Posts

Re: b16 header fitment

/bump

Reply Like

01-30-2010, 04:18 PM

geneeunit

Honda-Tech Member

Join Date: Apr 2008

Location: Lost Gates

Posts: 2,313

Likes: 0

Received 0 Likes on 0 Posts

Re: b16 header fitment

it will hang a little lower because b18's have a taller deck height.

but it will bolt up fine.

Reply Like

01-31-2010, 05:22 AM

Luca

Honda-Tech Member

Thread Starter

Join Date: Dec 2008

Posts: 36

Likes: 0

Received 0 Likes on 0 Posts

Re: b16 header fitment

Quote:

Originally Posted by geneeunit

it will hang a little lower because b18's have a taller deck height.

but it will bolt up fine.

aight thanks, if it hangs an 1inch to 2, it shouldn't be a problem right?

Reply Like

01-31-2010, 05:34 AM

Matt93eg

Honda-Tech Member

Join Date: Apr 2009

Location: Concord, NC

Posts: 1,427

Likes: 0

Received 1 Like on 1 Post

Re: b16 header fitment

Quote:

Originally Posted by Luca

aight thanks, if it hangs an 1inch to 2, it shouldn't be a problem right?

I doubt it will hang an extra inch to 2 inches lower. As far as it hanging lower mattering, that depends on how much your car is lowered. If your at stock height you will probably be fine in most scenarios. If your lowered a bit it might scrape on certain things, if your slammed it might constantly drag.