b16 head with gsr cams and gsr block with type r pistons.
12-22-2007, 01:14 PM
#1
Thread Starter
Join Date: Dec 2007
Location: wenatchee, wa, us
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
b16 head with gsr cams and gsr block with type r pistons.
this is the setup im putting together right now and im wondering how much horse power will i be getting? thanks
12-22-2007, 02:01 PM
#3
Honda-Tech Member
damn, can we please act a little bit more like a dick!! 
Your results are going to depend on a your tune and other parts. The setup you have is a little on the mild side, but is a good starting point. Depending on what crank/rod combo you are running your compression will be around 11.0. With a decent intake manifold, header and cams you could easily see 180-190 at the wheels. A decent tune with a combo of the right parts can take you a long way.
Your results are going to depend on a your tune and other parts. The setup you have is a little on the mild side, but is a good starting point. Depending on what crank/rod combo you are running your compression will be around 11.0. With a decent intake manifold, header and cams you could easily see 180-190 at the wheels. A decent tune with a combo of the right parts can take you a long way.
12-22-2007, 02:04 PM
#4
Honda-Tech Member
Re: (QuickDxEk)
run a b16 intake cam and gsr exhaust cam and you get a lil bit more power out of it. youll probably be at about 155 to 160 to the wheels.
Thread
Thread Starter
Forum
Replies
Last Post
eg4life1202
All Motor / Naturally Aspirated
9
11-11-2006 11:00 PM
EGinNY
Honda Civic / Del Sol (1992 - 2000)
7
03-07-2005 07:45 AM
