B16 A2 Swap W/ NON VTEC HARNESS !!!HELP!!
#1
Thread Starter
Join Date: Jul 2006
Location: Dallas, Oregon, USA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
B16 A2 Swap W/ NON VTEC HARNESS !!!HELP!!
I know that i can do it, but i'm gonna need some help for what wires i need to add to my factory harness to make my Vtec work on my new B16 in my EG hatch. If someone knows which wires i need to add to which port of the ECU, and could send me some diagrams or something i would muchly appreciate it. Thanks
#2
Honda-Tech Member
Re: B16 A2 Swap W/ NON VTEC HARNESS !!!HELP!! (OregonEGHatch)
https://honda-tech.com/zerothread?id=1171263
this should help as far as for the pin outs. for the wiring, just run the wire from the desired point to the ecu.
this should help as far as for the pin outs. for the wiring, just run the wire from the desired point to the ecu.
Thread
Thread Starter
Forum
Replies
Last Post
smash fascism
Honda CRX / EF Civic (1988 - 1991)
1
04-08-2005 05:39 PM