axle seal for a JDM b16a,...
09-08-2004, 10:51 AM
#1
New User
Thread Starter
Join Date: Oct 2001
Posts: 1,840
Likes: 0
Received 0 Likes
on
0 Posts
axle seal for a JDM b16a,...
friend of mine has a jdm b16a motor and he needs to replace the axle seal on the passenger side,...the two axle seal choices are 90-93 integra seals or 95 del sol DOHC VTEC seals,...before i tell him to go out and buy one,..i need to know a definite answer,..anybody know the answer?
09-08-2004, 11:04 AM
#2
Honda-Tech Member
Join Date: Dec 2003
Location: Charleston, SC
Posts: 7,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: axle seal for a JDM b16a,... (2.0 EK)
it depends on the halfshaft that he is using
there are two different styles
one has an "innie" (where the CV axle actually goes inside the halfshaft) on the outboard side....it is what comes stock on a 90-93 teg
and the other style is the "outie" (where the CV axle has the female spline and actually slips over the halfshaft) on the outboard and inboard side and it comes stock on a 94-01 teg
"outie"=male-94-01
"innie"=female-90-93
there are two different styles
one has an "innie" (where the CV axle actually goes inside the halfshaft) on the outboard side....it is what comes stock on a 90-93 teg
and the other style is the "outie" (where the CV axle has the female spline and actually slips over the halfshaft) on the outboard and inboard side and it comes stock on a 94-01 teg
"outie"=male-94-01
"innie"=female-90-93
Thread
Thread Starter
Forum
Replies
Last Post
sickazzcivic69
Honda Civic / Del Sol (1992 - 2000)
2
12-03-2005 01:46 PM
