mydseriessux

Has Anyone put a awd setup from the older wagons into a eg? If so what level of fab is needed? Thanks

dpaton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mydseriessux &raquo;</TD></TR><TR><TD CLASS="quote">what level of fab is needed?</TD></TR></TABLE>
Insane.

Think building a car from scratch. If you can't weld, design, and build to the standards of a master race fabricator, plan on something else. It's HARD.

92'si

In an earlier post (that I cant find) it was said that the drivetrain on that ef wagon couldnt handle much more hp than stock and would blow/break. the guy did say it was fun while it lasted tho?

-Gary-

Yeah, your hearts in the right place....and anything can be done....hell I've seen a RWD drive EG. (it looked like **** IMO)

ANyway, if you're one of those people who do things that people say can't be done, go for it and make sure you sell whateve blueprints you make.

eg-owns you

go to school for engineer or you better be damn good with numbers becuase it takes skill and brains to do somthing like that RIGHT key word

Orangecivic251

it can be doen i've see an eg with a 350 and a blower

Hondaciv95VX

CRV drivetrain.

Ferget the EF.

But yes, ground up build....

suspendedHatch

I had a turbo AWD wagon and it handled the power just fine. It was also auto trans. Stop spreading unfounded rumors. Yeah maybe it can't handle 400+ hp, but it handled 200 whp.

I have an EG, an EF, and I also have a parted out EF wagon AWD with the drivetrain lying next to my driveway. But there's a reason why you don't see me trying it. It's an abomination against god that's why. I'll sell the AWD drivetrain to first blasphemer that shows up with cash. God help your soul.

Syndacate

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by suspendedHatch &raquo;</TD></TR><TR><TD CLASS="quote">I had a turbo AWD wagon and it handled the power just fine. It was also auto trans. Stop spreading unfounded rumors. Yeah maybe it can't handle 400+ hp, but it handled 200 whp.

I have an EG, an EF, and I also have a parted out EF wagon AWD with the drivetrain lying next to my driveway. But there's a reason why you don't see me trying it. It's an abomination against god that's why. I'll sell the AWD drivetrain to first blasphemer that shows up with cash. God help your soul.</TD></TR></TABLE>

lmao, true words of inspiration

AntiochOG

This question gets asked all the time. Try doing a search, but since your new I thought I would help you out and do one for you.

https://honda-tech.com/zerothread?id=1579586
https://honda-tech.com/zerothread?id=1688507
https://honda-tech.com/zerothread?id=1629548
https://honda-tech.com/zerothread?id=1609543
https://honda-tech.com/zerothread?id=1615075

There are alot more threads out there too, but that should get you going. Basically it all boils down to: Yes it can be done, its going to cost you alot of money and take alot of time, and if you do it everyone wants a write up and some pictures.

highroller54

click my project in my sig, its a ef but you get the picture

kuntry_boi06

i know that on homemadeturbo.com a couple people are makin them..

Jussstin

wont awd take a lot of work??? wow sound like a headache on where to start

Timmay

goto japan and find your self a stock awd civic or intergra

mydseriessux

thanks. a lot for the advice. I understand the challenge and decided the crv drivetrain has the most potential with the B series bottom end . Thanks for everyones time ...NooB

mydseriessux

I like the EF project !! good luck