AUTO TO MANUAL CONVERSION ON A B16A EG9
#1
Honda-Tech Member
Thread Starter
AUTO TO MANUAL CONVERSION ON A B16A EG9
Hi guys,
A friend of mines did this swap, and he is using a manual p30 ecu(eg6). What he finds is that it is very lazy low down, below 6g. Pulls stong after that. Now he had this swap in previously, and the car use to pull strong throughout the power band. but the car was stolen and completely stripped. Everthing was re-done but he is now getting this problem with the new ecu.
Any suggestions?
A friend of mines did this swap, and he is using a manual p30 ecu(eg6). What he finds is that it is very lazy low down, below 6g. Pulls stong after that. Now he had this swap in previously, and the car use to pull strong throughout the power band. but the car was stolen and completely stripped. Everthing was re-done but he is now getting this problem with the new ecu.
Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
Lx Civic 99
Honda Civic / Del Sol (1992 - 2000)
1
01-02-2014 05:56 PM
tyler100
Honda CRX / EF Civic (1988 - 1991)
12
07-15-2008 08:53 AM