Apex VAFC into 01 civic questions.....
#1
Honda-Tech Member
Thread Starter
Apex VAFC into 01 civic questions.....
Has anyone done this setup yet? I have a few questions regarding some pin outs. Any help is appreciated.
Thanks, Jason
Thanks, Jason
#3
Honda-Tech Member
Thread Starter
Re: Apex VAFC into 01 civic questions..... (delacampos)
Ok , here is what we have.
Power to A3
Ground to A24
RPM signal to E9
Throttle signal to A15
Manifold pressure to A19
VTM to B9
Vtec press to B15.
Let me know if those are correct. That is from the 01-02 service manual.
We also hooked up the RPM sig to A30 and the car only read 1/4 of the true RPM. This is what we expected since A30 is the #1 ignition coil.
Thanks for all the help.
JAson
Power to A3
Ground to A24
RPM signal to E9
Throttle signal to A15
Manifold pressure to A19
VTM to B9
Vtec press to B15.
Let me know if those are correct. That is from the 01-02 service manual.
We also hooked up the RPM sig to A30 and the car only read 1/4 of the true RPM. This is what we expected since A30 is the #1 ignition coil.
Thanks for all the help.
JAson
Thread
Thread Starter
Forum
Replies
Last Post