any one need the hook up for head work? D series
04-29-2004, 03:05 PM
#1
Thread Starter
Join Date: Sep 2003
Location: Lake City, FL
Posts: 1,215
Likes: 0
Received 0 Likes
on
0 Posts
any one need the hook up for head work? D series
Ok so I got a set of guys who are doing / did my head work compared to the rest of the peeps out there they are very cheap and do A+ work...
heres what they have came up with for D series Motors lemme know if you guys are intrested...
port and polish, Port matching to Gaskets, cleaning up all flash marks. 350.00
Diss-asymble, Preclean (super sonic Hot tank), 3 angle valve job, Valve cutting and swirl polishing of valves, All new gaskets (optional milling for raised compression) Final clean and reasymbly for 425 + 75 for milling Will only go .0020 for Z6= 9.6:1 and Y8 10.1:1 Plus shipping both ways...
Not to bad theres a another local machine shop that wanted 1900 for all that
anyways let me know if any of you guys are intrested. 
heres what they have came up with for D series Motors lemme know if you guys are intrested...
port and polish, Port matching to Gaskets, cleaning up all flash marks. 350.00
Diss-asymble, Preclean (super sonic Hot tank), 3 angle valve job, Valve cutting and swirl polishing of valves, All new gaskets (optional milling for raised compression) Final clean and reasymbly for 425 + 75 for milling Will only go .0020 for Z6= 9.6:1 and Y8 10.1:1 Plus shipping both ways...
Not to bad theres a another local machine shop that wanted 1900 for all that
anyways let me know if any of you guys are intrested.
Thread
Thread Starter
Forum
Replies
Last Post