Another ls/vtec questions & concerns
#1
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: Solo
Posts: 2,190
Likes: 0
Received 0 Likes
on
0 Posts
Another ls/vtec questions & concerns
Helping a friend with his project....here is the setup..wanting to get close to 12.5 CR without any clearance issues:
-B18A1 block
-81.5 mm bore
-PCT (JDM B16B) pistons
-LS crank and rods
-ARP rod bolts
-ARP headstuds
-OEM B-series 3-layer headgasket
-B16A head
-Skunk 2 valvetrain with P&P and multi angle valve job
-PRO 2 camshafts
Been searching around, but didn't get any definite answers...will he have clearance issues? Thank you in advance.
-B18A1 block
-81.5 mm bore
-PCT (JDM B16B) pistons
-LS crank and rods
-ARP rod bolts
-ARP headstuds
-OEM B-series 3-layer headgasket
-B16A head
-Skunk 2 valvetrain with P&P and multi angle valve job
-PRO 2 camshafts
Been searching around, but didn't get any definite answers...will he have clearance issues? Thank you in advance.
Thread
Thread Starter
Forum
Replies
Last Post
cleanazcoupe
All Motor / Naturally Aspirated
7
09-14-2010 03:39 PM