act 6 puck un-sprung question.
07-14-2002, 06:40 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: 11,000 rpm daily, GA
Posts: 2,317
Likes: 0
Received 0 Likes
on
0 Posts
act 6 puck un-sprung question.
I found an ACT 6 puck clutch for a good deal, but it said it was soild, which i guess means it's unsprung. So i'm assuming this is a pretty serious racing clutch. Anybody ever heard of anyone using these things?
07-14-2002, 07:15 PM
#2
Honda-Tech Member
Join Date: Dec 2001
Location: Phoenix, AZ, USA
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Re: act 6 puck un-sprung question. (Plan B)
I used to run one in my built SOHC. It's a mean son of a bitch. Not very fun to drive on the street without some practice.
07-14-2002, 07:21 PM
#4
HT White Ops
Re: act 6 puck un-sprung question. (Plan B)
You'll want a sprung hub if you drive on the street.
Clutchs are counter-intuitive. Less is more and more is less. The less pucks it has, the more it will bite, et cetera. Stick with a full disc with a sprung hub. That'll be the smoothest...
Clutchs are counter-intuitive. Less is more and more is less. The less pucks it has, the more it will bite, et cetera. Stick with a full disc with a sprung hub. That'll be the smoothest...
07-14-2002, 07:30 PM
#5
Join Date: Dec 2001
Location: Riceville, usa
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Re: act 6 puck un-sprung question. (eg_nezay)
I have one and I like it, it grabs like you wouldnt believe!But be ready to work out your leg! 
Thread
Thread Starter
Forum
Replies
Last Post
