96 VTI-R Civic HB B16 require suggestions for Bolt on Upgrades to net Most HP-$
#1
Thread Starter
Join Date: Jul 2006
Location: gold coast, Qld, Australia
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
96 VTI-R Civic Hatch B16 suggestions for Upgrades Most HP-$
Hello all,
I have a 96 VTI-R HB civ which is about to get a severe bolt on attack.
I have already chosen my camshafts and valves. However i would appreciate any insight into the following topic as any parts for honda's are UBER RARE in AUS as well as Disgustingly OVERPRICED. so i wish to be careful and research all or any suggestions possible for the most efficient upgrades that i can afford.
MY engine is "96" OBD2 B16A2
Exhaust is "2.5" inch catback with cat remaining + stock manifold
Everything else is stock.
i have bought the Apexi power FC stand alone ecu, denso injectors, dh-Racing port matched typhoon i-m with dh-Racing billet tapered and port-matched 74mm-69mm T-b as well as dh-Racing fuel pressure regulator!
I still need to pay for aem c-gears, itr-Knock-off Header, and DH-Racing Flowed 320 cfm custom built pr3 head to dave's personal specs.
Again, thanking all of you ahead of time for your time and suggestions.
Modified by JohnnyVtec at 7:20 PM 8/28/2006
I have a 96 VTI-R HB civ which is about to get a severe bolt on attack.
I have already chosen my camshafts and valves. However i would appreciate any insight into the following topic as any parts for honda's are UBER RARE in AUS as well as Disgustingly OVERPRICED. so i wish to be careful and research all or any suggestions possible for the most efficient upgrades that i can afford.
MY engine is "96" OBD2 B16A2
Exhaust is "2.5" inch catback with cat remaining + stock manifold
Everything else is stock.
i have bought the Apexi power FC stand alone ecu, denso injectors, dh-Racing port matched typhoon i-m with dh-Racing billet tapered and port-matched 74mm-69mm T-b as well as dh-Racing fuel pressure regulator!
I still need to pay for aem c-gears, itr-Knock-off Header, and DH-Racing Flowed 320 cfm custom built pr3 head to dave's personal specs.
Again, thanking all of you ahead of time for your time and suggestions.
Modified by JohnnyVtec at 7:20 PM 8/28/2006
Thread
Thread Starter
Forum
Replies
Last Post
JohnnyVtec
All Motor / Naturally Aspirated
2
08-30-2006 12:47 AM
Heavy Pee
Honda Civic / Del Sol (1992 - 2000)
2
01-01-2002 11:56 AM