95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2013
Location: USC, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
I Have a 95 honda civic ex
i have a zc block
the car start but when i accelerate it does it a bit shaky also when it is returning to idle position sometimes i will shut off sometimes it sounds like it will but does not
i have 3 check engine codes which are
code
3: map censor.
15: ignition output signal.
41: primary oxygen heater.
i have a zc block
the car start but when i accelerate it does it a bit shaky also when it is returning to idle position sometimes i will shut off sometimes it sounds like it will but does not
i have 3 check engine codes which are
code
3: map censor.
15: ignition output signal.
41: primary oxygen heater.
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2013
Location: USC, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Help fixing some Problems with my 95 Honda Civic Ex
i have a p28 ecu and for the head am not sure! but its a vtech!
not sure how to reset all the codes!
not sure how to reset all the codes!
Trending Topics
#9
B*a*n*n*e*d
Re: 95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
Wrong ECU, partner. And i would get that map sensor fixed too if i were you. Good luck, friend.
#13
Honda-Tech Member
Thread Starter
Join Date: Oct 2013
Location: USC, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
the ecu is not chipped or tunned. So their no way for the car to work properly with the p28 ecu?
#14
Honda-Tech Member
Thread Starter
Join Date: Oct 2013
Location: USC, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
Chopperkiller go on YouTube and type in Honda civic map censor and you will find a video on how to check the map censor
#16
Honda-Tech Member
Thread Starter
Join Date: Oct 2013
Location: USC, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
The codes are still their even if i reset the ecu!
Also how would i know what distributor would i need for the head?
Also how would i know what distributor would i need for the head?
#17
Honda-Tech Member
Join Date: Aug 2007
Location: chehalis, wa, usa
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
there should be a code stamped on your Distributor ot's on one of the 3 ears the mounting bolts go through.
as long as the dissy you have mounts correctly you need the same code.
on my 97 GS-R B18C1 the code is TD-86U
on a D16Z6 the code is TD-44U
as long as the dissy you have mounts correctly you need the same code.
on my 97 GS-R B18C1 the code is TD-86U
on a D16Z6 the code is TD-44U
#18
Honda-Tech Member
Thread Starter
Join Date: Oct 2013
Location: USC, CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: 95 Civic Ex - shaky acceleration, low idle, 3 CEL codes
It's a zc block but the head is a 92 P08-1
It's because I swapped out the motor it had that's why am not sure because the old distributor doesn't fit it
It's because I swapped out the motor it had that's why am not sure because the old distributor doesn't fit it
Thread
Thread Starter
Forum
Replies
Last Post
pip9
Honda Civic / Del Sol (1992 - 2000)
1
12-28-2004 02:29 PM