Yonick90

I got a 95 DX trying to convert to power doors. I bought power doors from a EX but didnt get the wire harness with it. I saw a couple post from ppl selling harnesses for a EG my question is would that work with the DX?

Also any advice on the conversion? like stuff i should watch out for... or any other parts I would need

Funanin

I would think the harness would be the same and would work fine, its not a BMW so the door locks are not seen or regulated by the ecu so you should be fine just hooking them up the same as an EX.

Yonick90

Finding the floor harness from an EX is a pain, i cant find a junkyard with an EX anywhere. anyone have a junk civic?

vesnarrgh

lucky for me I have all the wiring but I still don't know if the switches are the same for the usdm or jdm.
ill let you know by friday when I have to buy both.

Yonick90

you get all your wiring from a junkyard?

vesnarrgh

yea, I purchased everything at my local junkyard. lucky for me its honda central in so.cal so it was easy to come by. I got the whole set up for 175 minus the door switches & panels.

Yonick90

theres plenty hondas in the junkyards but its like as soon as an EX gets there its already been gutted by the time i get there

vesnarrgh

i went to a dismantlle junkyard to be exact. they strip the cars themselves & sell the parts. so you might need to locate one of those rather then a do-it-yourself junkyard.

Funanin

try ebay

deschlong

iTrader: (8)

I bet there's plenty of 4dr sedans left - the USDM LX and EX both had power everything. Why not use a floor harness from one of these? It's what I did. Check my sig for a Power Mirror / Locks / Windows walkthrough.

rokunited

Just got this done to my Si hatch came out pretty good =D

B18bEG6ick

I just a set of doors for my Si yesterday and the guy cut the harness in the passenger side door, but he told me he'll get the whole harness for me in the firewall. How hard was it to put the wires for the Si's? You have anymore pictures of the install?