6 puck vs 4 puck unsprung clutch
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Blue Ridge, TX, USA
Posts: 2,407
Likes: 0
Received 0 Likes
on
0 Posts
6 puck vs 4 puck unsprung clutch
Just wondering what the difference is. I've driven on the 6, but never the 4. They supposedly hold the same torque. Just looking for reasons to go for one over the other. I thought I saw a thread a while back, I think it was in the s2k forum, but I can't find it now that I actually care to read it.
#4
Re: 6 puck vs 4 puck unsprung clutch (shepworldwide)
I have a exedy 3 puck, but its sprung. I was told it would be too hard to drive an unsprung clutch on the street. This one is great IMO.
#5
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: 6 puck vs 4 puck unsprung clutch (TurboCoop)
It sounds like you're already on the unsprung hub, which is just crazy IMO for a daily driver.
The general rule is to go with as weak a clutch as you can that can still hold the power you make. A stonger clutch just puts stress on the drivetrain for no reason.
The general rule is to go with as weak a clutch as you can that can still hold the power you make. A stonger clutch just puts stress on the drivetrain for no reason.
#7
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Blue Ridge, TX, USA
Posts: 2,407
Likes: 0
Received 0 Likes
on
0 Posts
Re: 6 puck vs 4 puck unsprung clutch (jolt-tsp)
It's for my Civic (track only). Will be running a GT28RS (BB turbo's only for me from now on), hoping for 280 horsepower. I want to overkill a little on the clutch to leave room for improvement. The 6 puck I drove on was on an s2000 and it felt great on the track, but on the street it does get annoying.
Trending Topics
#8
Honda-Tech Member
For 280, you could easily use a beefed up street clutch like an ACT XTSS, which would drive like a stock clutch with slightly heavier pedal feel. I use a 6-puck unsprung ACT XTR6 on my daily driver/weekend track car. It takes a couple of days to get used to it, but it's fine for daily driving, no chattering, smooth engagement/disengagement, slightly stiffer pedal. My wife, who normally drives an automatic, has no problems driving it smoothly either.
#9
Re: 6 puck vs 4 puck unsprung clutch (jolt-tsp)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jolt-tsp »</TD></TR><TR><TD CLASS="quote">What is the torque capacity of that three puck? Is it lasting you a while?</TD></TR></TABLE>I have 317hp and 223tq, and I have had this clutch for about a year now. Its holding up great so far, and Ive been to the drag strip a lot-- I have about 50 timeslips in my car... So I am very happy with it, especially considering it only cost me like $400-450 total, installed(I forget exactly how much). I would reccomend it to anyone with a turbo B-series or something similar
#10
Re: 6 puck vs 4 puck unsprung clutch (TurboCoop)
i would still get a sprung hub......my last daily i had a unsprung 6 puck and let me tell ya..after 6 months or so my left calf was noticably larger than my right...and it is a pain in the *** when in a tight parking lot.
#11
Honda-Tech Member
Re: 6 puck vs 4 puck unsprung clutch (hutch311)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hutch311 »</TD></TR><TR><TD CLASS="quote">i would still get a sprung hub......my last daily i had a unsprung 6 puck and let me tell ya..after 6 months or so my left calf was noticably larger than my right...and it is a pain in the *** when in a tight parking lot.</TD></TR></TABLE>
That's a function of the pressure plate, not the disk. You can use a 6-puck disk with a daily-drivable pressure plate.
That's a function of the pressure plate, not the disk. You can use a 6-puck disk with a daily-drivable pressure plate.
The following users liked this post:
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Blue Ridge, TX, USA
Posts: 2,407
Likes: 0
Received 0 Likes
on
0 Posts
Re: 6 puck vs 4 puck unsprung clutch (TurboCoop)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboCoop »</TD></TR><TR><TD CLASS="quote">I have 317hp and 223tq, and I have had this clutch for about a year now. Its holding up great so far, and Ive been to the drag strip a lot-- I have about 50 timeslips in my car... So I am very happy with it, especially considering it only cost me like $400-450 total, installed(I forget exactly how much). I would reccomend it to anyone with a turbo B-series or something similar </TD></TR></TABLE>
Thats good to know. Will definitely need to look into this setup
Thats good to know. Will definitely need to look into this setup
Thread
Thread Starter
Forum
Replies
Last Post
PrecisionH23a
Forced Induction
14
06-27-2004 01:40 AM