5th gen JDM EG6 SiR-II cluster... problems with bulbs blown out
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: AWD launchin on foolz
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
5th gen JDM EG6 SiR-II cluster... problems with bulbs blown out
I got my cluster in finally (have been running old DX auto cluster on my new B16 swap, no tach, LOL) and ordered it from ICB Motorsports /// JDM Land.
Fine condition and all, but it doesnt light up at the end of tach (4k+) and beginning of speed. The tach needle is dim, and the tops of the temp and gas gauges are dim too, so I figured it was just bulbs, and pulled it right back out after testing.
The bulbs for these spots were blown, or looked like it. Insides were all black residue.
I read in another thread they are automotive bulbs #24, size or whatever. Is that EVERY SINGLE ONE? Because I pulled a couple out of the USDM DX cluster, and they had a smaller bulb housing and such. Still the same?
---
Basically, if I go buy a bunch of these #24 bulbs or whatever, should I be good with just replacing them into the spots where they were blown? or is something worse at hand.
Fine condition and all, but it doesnt light up at the end of tach (4k+) and beginning of speed. The tach needle is dim, and the tops of the temp and gas gauges are dim too, so I figured it was just bulbs, and pulled it right back out after testing.
The bulbs for these spots were blown, or looked like it. Insides were all black residue.
I read in another thread they are automotive bulbs #24, size or whatever. Is that EVERY SINGLE ONE? Because I pulled a couple out of the USDM DX cluster, and they had a smaller bulb housing and such. Still the same?
---
Basically, if I go buy a bunch of these #24 bulbs or whatever, should I be good with just replacing them into the spots where they were blown? or is something worse at hand.
Thread
Thread Starter
Forum
Replies
Last Post
akunamatta
Honda Civic / Del Sol (1992 - 2000)
32
06-17-2007 08:09 PM